TechniSat DIGIT MF4-S Satellite TV System User Manual


 
7.3.2 CONAX PIN Code
Your digital receiver is equipped with a parental control feature,
which blocks access to specific selected programmes (see Point
8.3). In addition, in the case of CONAX-encrypted broadcasts, indivi-
dual programmes not suitable for viewing by children can be given a
prior block by means of a parental control code. In order to decode
the specific programme for viewing, the CONAX PIN code must
be entered. This PIN code is stored on the Smartcard. You will be
advised of the code when you receive the card. The CONAX PIN
code must therefore not be confused with the Unit PIN code of
the digital receiver (Point 8.3).
If you switch on a channel that is currently broadcasting a pre-blok-
ked programme, a message will be displayed.
> To view the programme, use the numeric keys to enter
the 4-digit CONAX PIN code.
> As soon as the code has been correctly entered, the pro-
gramme can be viewed normally.
If the code has been entered incorrectly, you can enter the
PIN code again, or press Back to exit from the menu.
7.4 Volume control
Your digital receiver is equipped for volume control. This makes ope-
ration of the receiver more convenient, as you thus have all impor-
tant functions combined on the remote control of the receiver, and
will only rarely have to use the remote control of your television set.
When the digital receiver is switched on, sound volume will be set at
the level last used.
> Adjust the volume of your digital receiver using the Volume
+ key to increase the volume, and Volume - to decrease
the volume.
> Press the Sound on/off key to mute the sound, press the
key again to switch sound back on again.
7.5 TV/Radio switching
The pre-programmed settings include both radio and TV program-
mes.
> Press the TV/Radio key to switch the digital receiver to
radio mode. The receiver will now switch to the radio pro-
gramme last selected.
> Press the TV/Radio key again to revert to the TV program-
me last selected.
25