TechniSat DIGIT MF4-S Satellite TV System User Manual


 
For daily use
Switching on and off
> Switch the digital receiver on by pressing the
On/Standby key, either on the unit or on the remote
control.
> Press this key again to switch the receiver off again.
Programme selection
Using the programme up/down keys
> Use the Programme keys up/down either on the
unit or on the remote control to move up or down one
programme slot at a time.
Using the numeric keys
> Use the numeric keys to enter the desired programme
number. For example:
1 for programme slot 1
1, then 4 for programme slot 14
2, then 3, then 4 for programme slot 234
When entering programme numbers consisting of sevral
digits, you have approx. 3 seconds time after pressing a key
to complete the entry.
If you wish to enter a number consisting of only one or two
digits, you can speed up the selection process by keeping the
key pressed down a little longer on the last digit.
Using the programme list
> Press OK.
> Now use the arrow keys up/down to mark the
desired programme.
> Press the OK key to display the marked programme.
> Use the arrow keys up/down to move up or down
the list one line at a time.
> Use the arrow keys left/right to move through the
list one page at a time.
Volume control
> Adjust the volume of your digital receiver by pressing
the Volume + to increase the volume, and the
Volume - key to decrease the volume.
> Press the Sound on/off key to switch the sound on
or off (mute).
TV/Radio switching
> Press the TV/Radio key to switch between TV and
radio mode.
74
151104 2233450001400