TechniSat DIGIT MF4-S Satellite TV System User Manual


 
information on the contents of various programmes.
In addition, you may use the SFI functions to select a particu-
lar programme, to pre-select a programme, or to set a timer
for a programme.
7.15.4 Now (table with current programme contents)
The first SFI table to be displayed is the “Now” table (Fig. 7-16) sho-
wing the programmes currently broadcast. The yellow bar to the right
of the programme name indicates the elapsed time of the current
programme. The programme currently selected is marked.
> Use the arrow keys up/down to move the marker
through the list one line at a time. To move the marker one
page at a time, use the arrow keys left/right.
> The SFI functions (Point 7.14.3) are now available for use.
> Press the yellow function key to go to the SFI table “Next
(see Point 7.15.5)
or
> Press the TV/Radio key to return to normal operation.
7.15.5 Next
> Use the yellow function key to call up the table "Next" (fol-
lowing programmes). (Fig. 7-17)
> All the SFI function s are available (Point 7.15.3).
> Press the yellow function key to go to the SFI table “More
(Point 7.15.6)
or
> Press either the green function key or the Back key to
return to the previous SFI table “Now
or
> Press the TV/Radio key to return to normal operation.
7.15.6 More
> Pressing the yellow function key again while the SFI table
Next” is displayed will take you to the SFI table “More”.
(Fig. 7-18)
In thios table, an additional time window is shown in the title
line. The time of the SFI table is displayed in this window.
> Press the yellow function key to page forward by the time
period shown in the yellow coloured field.
31
(Fig. 7-18)
(Fig. 7-17)