TechniSat 1 Satellite TV System User Manual


 
5.4 LNB-Setting/Adjustment of external unit/satellite selection
Once you have adjusted the receiver to your personal preferences, you should now, if neces-
sary, still adjust the receiver in accordance with your dish antenna. The receiver is pre-pro-
grammed at the factory for reception of ASTRA and EUTELSAT by means of a Universal
LNB (see annexure with technical terms. These programmes can be received without any
further adjustments, if your receiving equipment permits this.
If, however, you wish to receive signals from another satellite, or if you are using a different
type of LNB, then you must adjust the receiver as follows :
> Press the Menu, key in order to display the Main menu.
> Use the arrow up/down keys to mark the line Settings.
> Confirm by pressing OK.
The menu Settings will be displayed.
> Now mark the line LNB Settings by means of the arrow up/down keys.
> Confirm by pressing OK.
The menu LNB Settings will be displayed.
13
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 13