Filter
Top Products
6.11.2 Programme preview for next few days
In as far as this is provided by the broadcaster, you can use the arrow right key to dis-
play information relating to the programme for the next few days, for the current channel.
Press the arrow left key to return to the previous table of information.
6.11.3 EPG Information
In as far as this is broadcast, you can use the EPG function to obtain information on the con-
tent of various programmes:
> Mark the relevant programme by means of the arrow up/down keys.
> Press the EPG key in order to display the information.
You can scroll through lengthy texts with the aid of the arrow up/down keys, and
you can page through them with the aid of the arrow left/right keys.
> Press the Back key to return to the previous table of information.
6.11.4 Switching EPG off
> Press the Back key to return to normal operation.
6.12 Timer
Your receiver is equipped with a timer. This allows you to make video recordings even in
your absence Timer operation is indicated by a blinking light on the LED display. Timer ope-
ration can be switched off by pressing the On/Standby key.
In order to programme the timer, proceed as follows:
6.12.1 Programming via EPG:
> Select the channel on which the programme to be recorded is broadcast.
> Press the EPG key.
The EPG table of the selected channel will be displayed.
> Use the arrow up/down keys to mark the selected programme.
> Press the yellow function key (Record).
The data relating to the selected programme will be taken over into the timer memory,
and will be displayed on screen for control purposes.
20
DIGIBOX1_englisch.qxd 26.09.01 09:55 Seite 20