Filter
Top Products
> Now use the arrow up/down keys to select the desired programme list.
> Confirm by pressing OK.
The selected list will now be displayed. As described above the desired programme
can be selected and set.
6.2.4 Calling up blocked/restricted programmes
If a programme is selected that is blocked by the child-proof feature, the prompt PIN-Num-
ber will appear on the screen.
> Use the numeric keys to enter your PIN number.
The selected programme will now be shown.
In order to make things convenient for viewers, the PIN number need be entered only once
per operational cycle. The child-proof feature is only activated again the next time the set is
switched on.
6.2.5 Information box
Each time the programme is changed, an information box is briefly displayed, showing the
programme name as well as the list number. In addition, other programme characteristics are
shown, such as TxT for teletext, 16/9 for 16/9 format broadcasts, A/B for various audio
channels (e.g. multi-lingual movie or various radio stations) and a key is displayed for
encrypted programmes.
6.3 Volume control
You have the facility to regulate the volume of your receiver. This facilitates use of the recei-
ver, since you have all important functions on one remote control, and will only rarely have to
operate the remote control of your TV set. When the receiver is switched on, sound will be
reproduced at the volume level last set.
> Adjust the volume of your receiver by means of the Lautstärke + key to make it
louder, and the Lautstärke - key to reduce volume.
> Press the Sound on/off key to mute the sound, press the key again to turn the
sound on again.
6.4 Selecting a different language
If a programme is broadcast in several languages, you can use the following procedure to
select a different language:
> Press the Language Selection key.
If more than one language is being broadcast, a list of currently broadcast languages
will be displayed on screed.
> Use the arrow up/down keys to mark the selected language.
> Confirm by pressing OK.
You can now listen to the soundtrack in the selected language. Your receiver is also equip-
ped to receive mono broadcasts. When these are current, you can use the MONO1/
MONO2 to switch between the audio channels MONO1 and MONO2.
6.5 Switching between TV and Radio
The receiver has been pre-programmed with both TV and radio programmes. When recei-
ving a radio programme, the TV image is switched off, and only the programme name is dis-
played on screen.
> Use the TV/Radio key to select radio reception for your receiver.
The receiver will now switch to the radio programme last selected.
> Pressing the TV/Radio key again will return you to the last TV programme selected.
17
bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 17