Filter
Top Products
> Press the EPG key in order to display the information.
You can scroll through lengthy texts with the aid of the arrow up/down keys, and
you can page through them with the aid of the arrow left/right keys.
> Press the Back key to return to the previous table of information.
6.11.4 Switching EPG off
> Press the Back key to return to normal operation.
6.12 Timer
Your receiver is equipped with a timer. This allows you to make video recordings even in
your absence Timer operation is indicated by a blinking light on the LED display. Timer ope-
ration can be switched off by pressing the On/Standby key.
In order to programme the timer, proceed as follows:
6.12.1 Programming via EPG:
> Select the channel on which the programme to be recorded is broadcast.
> Press the EPG key.
The EPG table of the selected channel will be displayed.
> Use the arrow up/down keys to mark the selected programme.
> Press the yellow function key (Record).
The data relating to the selected programme will be taken over into the timer memory,
and will be displayed on screen for control purposes.
> Press the green function key in order to delete the marked timer.
> Press the Back to return to the EPG screen, in order to execute further programming
20
bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 20