Filter
Top Products
165-072011 THCD-100 Power Supply Page 16 of 28
h) Relay Screen
This screen allows you to set the trip point for when the relay switches. The relay also contains
some hysteresis to stop it ‘chattering’. This is configurable from this screen as well and is
represented as a percentage of full scale of the input channel, with limits of 0.0% (i.e. no
hysteresis) to 10.0%. If the second relay option is factory fitted then the above fields are
duplicated for the second relay and are changed to Trip 1, Hyst 1 & Trip 2, Hyst 2 as
appropriate.
Switch Functions:
Func
Go back to Main Menu screen
◄ Select previous character when in edit mode
► Select next character when in edit mode
▲ Move edit field selection up
▼ Move edit field selection down
Zero Go to edit mode for currently selected field
i) Factory Defaults Confirmation Screen
If Factory Defaults is selected from the Main Menu, this screen appears to ask for confirmation of
the requested function. If confirmed then the screen changes to show a percentage of
completion of the factory defaults and once completed the THCD-100 will restart.
Switch Functions:
Func Go back to Main Menu screen
◄ If held, starts factory default when Zero is pressed
► No function
▲ No function
▼ No function
Zero Starts factory default if ◄ is held as well.