Filter
Top Products
165-072011 THCD-100 Power Supply Page 4 of 28
1. GENERAL INFORMATION
The THCD-100 is a multi featured process display controller, capable of interfacing directly to a mass flow meter,
mass flow controller or another process transducer such as the THPS-760S Vacuum Transducer. The THCD-100 is
a single channel unit which can be used to power a bipolar (±15dc @ 250mA) device and/or display the output from
a transducer that supplies voltage signals up to 10 VDC. There is also an input that can be used for external
command (setpoint) control (+5v full scale). Digital interfaces to the THCD-100 include RS485 and RS232.
1.1. Features
16-bit Resolution
±0.2% Reading + 1 Digit Accuracy
0-5 Volt Set Point Via Front Panel Or Digitally (RS232/RS485)
Dual Programmable Alarms with Relays
RS232/485 and Analog Output (Standard)
CE Approved
1.2. Specifications
For a list of specifications, please see the PB-185_rev-0711_THCD-100 Power Supply.