Filter
Top Products
165-072011 THCD-100 Power Supply Page 24 of 28
6. SERVICE & CALIBRATION
6.1. Service
There are no user serviceable parts inside the instruments. Should any difficulties be encountered in the use
of the THCD-100, it is recommended that you contact Hastings Instruments for advice and instructions.
6.2. Analog Inputs
There is no user calibration for the THCD-100. It is recommended that the instrument be returned to
Hastings Instruments whenever such service is required.
There are no user adjustments in the instrument, indeed, the presence of lethal voltages within the
instrument means that the user is strictly forbidden from removing the covers without invalidating Hastings
Instrument’s obligations under warranty.
6.3. Cleaning
A dirty instrument may be wiped clean with a soft cloth that has been sprayed with a mild foaming cleaner
then wiped dry immediately.
Under no circumstances should the instrument be wetted directly or
left damp
6.4. End of Life
Hastings Instruments complies with the WEEE legislation and is registered as a manufacturer and importer
of Electrical and Electronic Equipment. Once this equipment reaches its end of life, or is no longer required
it may be returned to Hastings Instruments to be reused or recycled in accordance with the legislation. Please
contact Hastings Instruments for full details. Terms and conditions apply.