Texas Instruments 8100CB Projection Television User Manual


 
6
Introduction
3M™ Digital WallDisplay
©3M 2003. All Rights Reserved.
Safety Precautions
•To reduce the risk of electric shock, do not disassemble this appliance. Request a qualified technician
when service or repair work is required. Incorrect reassembly can cause electric shock when the
appliance is subsequently used.
Connect this appliance to a grounded outlet.
•Keep all ventilation openings free of any obstructions.
The projection lamp contains mercury. Always dispose of this lamp in a proper manner according to
local regulations.
•Do not apply force to the projection arm. This may cause permanent damage to the unit or may cause
personal injury.
•Do not manually open or close the projection arm while the 3M Digital WallDisplay is in operation.
The 3M Digital WallDisplay’s projection arm is motorized, and extends 42˝ (106 cm) from the instal-
lation while in use. Caution should be taken when operating or walking near the 3M Digital
WallDisplay. It is possible a tall person’s head or an upraised hand could come in contact with the pro-
jection arm.
•Do not place the product in direct sunlight, near heaters or heat radiating appliances.