Filter
Top Products
Other Requirements
Air supply
ITEM Pressure/Volume ISO8573.1 standard
Machine
80 psi at 9 ft
3
/min
4
Class 3-4-3
As cutting gas
140 psi at 35 ft
3
/min
5
Class 3-4-3
Dust collector - Torit DFT3-18
9 scfm at 90-100 psi Class 4-5-5
Dust collector - Farr GS-12
12 scfm at 90 psi
Laser Oscillator Gas
see laser pre-mix gas specification (p. 9 ) n/a
Assist gases
see assist gas recommendations (p. 10 ) n/a
Coolant
Chiller coolant includes the following:
Distilled water (Koolant Kooler: 75 gallons, CKD: 100 gallons, Orion: 50 gallons)
Additive (provided with machine)
6
1 gallon provided (mix 1:100 additive:water)
Connections
Hoses to connect air supplies to machine and dust collector
Laser pre-mixed gas (see page 9)
Assist gas (oxygen minimum) (see page 10)
LC3015 Theta User Installation Guide - October, 2003 7
4 2 micron maximum particulate size
5 Pressure and flow based on process requirements (material type and thickness) - contact Amada to discuss.
6 ISOGUARD Corrosion inhibitor, part# 71679859. Additional quantities available from AESI, at (714) 670-2111