Filter
Top Products
Protective Coatings
The machine may have protective coatings, possibly including wrapping paper and/or
cosmoline or other grease.
When present, the wrapping paper must be removed before moving the machine axes. Protec
-
tive grease or cosmoline must be thoroughly cleaned off before running the machine.
q
Check the X-axis, Y-axis, and Z-axis LM guides for wrapping paper and protective coating.
Make sure that you remove any paper from both sides of the carriage.
q
Check Z-axis guides and ballscrew and clean up as needed.
q
A suitable solvent such as kerosene may be used to remove the protective coating.
32 LC3015 Theta User Installation Guide - October, 2003