Filter
Top Products
Description of the Major Components
Your laser systems will arrive in several crates. The machine and accessories are packaged in
one crate. The chiller, dust collection system, gas regulators, and any optional equipment
(such as transformers or safety mats) will be crated individually.
The major components are:
q
The machine - includes laser oscillator. Note that several parts including the laser cutting head,
lenses and nozzles may be inside the accessory crate rather than mounted in place.
q
The chiller - this controls the running temperature of the laser oscillator. Flexible hoses and fit
-
tings are provided to connect it to the oscillator. The chiller can be positioned anywhere within a
reasonable distance from the machine. For exact distance limitations, see the chiller section (be-
ginning page 15) or contact Amada.
q
The accessory crates - these crates contain many small pieces of equipment required to install
and operate the machine.
q
The dust collector - provided to capture dust and particles generated by the cutting process.
q
The gas connection kit - this kit contains regulators, hoses, and fittings to connect the laser and
assist gas bottles to the machine.
q
The optional transformer 1 - all components except the dust collector operate on 200~220 VAC
3 phase. If your supply is 230V, 460V or other voltage, a step down transformer will be required.
q
The optional transformer 2 - the dust collector requires 460V, 3 phase. If you do not have 460V
at sufficient current for the unit selected, a transformer will be required.
q
The Shuttle System - (option) provides rapid transfer of pallet table in/out of the machine.
LC3015 Theta User Installation Guide - October, 2003 1