Technicolor - Thomson 20LB020S4 CRT Television User Manual


 
Operation
15
En
18. If the full channel name is set, quit the entry field using ar-
row buttons / ÿ.
19. Select
Tuner
in the
Source
menu line for the aerial or
cable system stations using the arrow buttons / ÿ.
20. Press the OK button to store the settings.
21. To allocate further channels select the channel line again
and proceed in the same way.
22. Press the EXIT button to quit the menu.
Allocating and deleting channels
1. Press the MENU button twice, the Program list appears on
the screen.
2. Use arrow buttons Ÿ / to select the channel whose po-
sition needs to be changed.
3. Select the channel using right-hand arrow button ÿ.
4. Use arrow buttons Ÿ / to guide the bar containing the
channel name to a new position.
5. Use left-hand arrow button to store the new channel po-
sition in the list.
6. If a channel is in the other bar, it can be deleted by pressing
the OK button.
7. Press the EXIT button to quit the menu.
Picture and sound
Adjusting the picture settings
Depending upon the room lighting conditions, it may occasion-
ally be necessary to adjust the brightness, contrast or other picture
settings.
1. Open the Picture menu: Press MENU button. The title
Picture
is highlighted green.
2. Press the arrow button ÿ to move the green marker to the
Picture menu.
3. Use arrow buttons Ÿ / to select the individual menu
items.
4. Use arrow buttons / ÿ to modify the relevant data. To
make modification easier, only the corresponding submenu
item appears when you press arrow buttons / ÿ.
5. By pressing OK button, all the changes to the picture for-
mat are saved.
6. Press the EXIT button to quit the menu.
Note:
The Picture menu can also be opened by pressing
the red button. The green marker is already located
in the Picture menu here. Press OK button to save
any changes. The menu automatically disappears
approx. 5 seconds after the last input was made.
The
Brightness
and
Contrast
settings are governed by
room brightness. The
Colour
setting is based on skin tone.
The
Sharpness
setting is a matter of personal preference.
The tone can also be adjusted to suit personal preferences. Select
between "colder" (- left) and "warmer" (+ right).
Select the desired picture format in
Format
. The television
screen can be adjusted to various transmission formats. Make
sure the picture geometry is correct.
En