Filter
Top Products
Operation
16
Adjusting tone settings
1. Open the Sound menu: Press MENU button.
2. Select Sound in the Main menu using arrow buttons Ÿ /
⁄.
3. Press arrow button ÿ to move the green marker to the
Sound menu.
4. If a stereo signal is received, the option of changing be-
tween stereo and mono reception is available in the
Nor-
mal
sound menu item.
5. Use the arrow keys Ÿ / ⁄ to select the menu items
Treble
,
Bass
or
Balance
.
6.
Mode
(
Wide
/
Normal
) creates the effect of acoustic
base dispersion. This gives the impression that the loud
speakers have been moved further apart from each other.
7.
AVL
(
On
/
Off
): AVl (Automatic Volume Levelling) cor-
rects the differences in volume levels between individual
television programs and advertisements. If you prefer the
fluctuations in volume to remain, for example with music
Programs, set the AVL to Off.
8. Use arrow buttons / ÿ to modify the relevant data.
9. Press the OK button to store the settings.
10. Press the EXIT button to quit the menu.
Note:
The Sound menu can also be opened by pressing green
button. The green marker is already in the Sound menu.
Press OK button to save any changes. The menu auto-
matically disappears approx. 5 seconds after the last in-
put was made.
Channel-specific settings
When switching channels there are sometimes differences in
volume and contrast. The volume and the contrast can therefore
be adjusted individually for each channel position.
1. Select the Pr. set menu: Press MENU button.
2. Select Pr. set in the Main menu using arrow buttons Ÿ
/ ⁄.
3. Press arrow button ÿ to move the green marker to the Pr.
set menu.
4. Use arrow buttons Ÿ / ⁄ to select the individual menu
items.
5. Use arrow buttons / ÿ to modify the relevant settings or
data.
6. Select the channel position from the
Programme
line - the
relevant channel name should appear automatically. A total
of four favourite teletext pages per channel position can be
specified in the lines
TXT-page 1 – 4
by entering the
three-digit number of a teletext page. These can then be ac-
cessed directly by pressing the F1-F2-F3-F4 function
buttons (see section The function buttons ... on page 19).
7. In the
Volume
and
Contrast
lines, adjust the values
correspondingly using the arrow buttons / ÿ.
8. Press the OK button to store the settings.
9. Press the EXIT button to quit the menu.