Technicolor - Thomson 20LB020S4 CRT Television User Manual


 
Operation
19
En
Special functions
Fade-in display window
The status line with channel position, channel names, sound
mode and time is displayed by pressing the INFO button.
Otherwise the display will fade out automatically after approx. 5
seconds.
The time display only functions when a transmitter offers
teletext.
The function buttons ...
Different functions can be assigned to buttons F1, F2, F3 or F4.
1. Open the Pref. menu: Press MENU button.
2. Select Pref. in the Main menu using arrow
buttons Ÿ / .
3. Press the arrow key ÿ to move the green marker to the
Pref. menu.
4. Select either F1, F2, F3 or F4using arrow buttons
Ÿ / .
5. Use arrow buttons / ÿ to set the desired function.
6. Press the OK button to store the settings.
7. Press the EXIT button to quit the menu.
8. In normal TV mode, pressing the corresponding keys F1,
F2, F3 or F4 activates the defined function.
List
1. The channel list appears on the screen.
2. A channel can be selected by pressing arrow buttons
Ÿ / .
3. To confirm the channel selected, press OK button.
Format
Switching picture format (see Adjusting the picture settings15).
The first time the button is pressed, the OSD window for the cur-
rent screen format appears on the screen. The picture format
changes if the button is pressed again or at any other time. The
window disappears approx. 5 seconds after the last procedural
step is carried out.
TXT-page 1-4
Direct access to favourite stored teletext pages 1-4, see
page 16.
Clock
1. The first time the button is pressed, the time is displayed.
2. The window disappears from the screen if the button is
pressed again.
Timer
1. Open the Timer menu: Press MENU button.
2. Use arrow buttons Ÿ / to select
Timer
in the Main
menu.
3. Press arrow button ÿ to move the green marker to the
Timer menu.
4. Use arrow buttons Ÿ / to select the individual menu
items.
5. Use arrow buttons / ÿ to modify the relevant settings or
data.
Setting the timer:
1. Under
Time
, enter the hours and minutes for the switch-off
time using arrow buttons / ÿ.
2. Activate the
Timer
by setting it to On.
3. Press the EXIT button to quit the menu. The set automati-
cally switches to standby mode after the specified time has
elapsed.
En