Filter
Top Products
Auxiliary equipment
26
RGB signal
The RGB signal (red-green-blue colour signal), e.g. from a DVD
player, digital SAT receiver or games console, can also be fed in
using Scart socket E.
For RGB output the horizontal picture position can also be ad-
justed. This is carried out in the Picture menu.
Press the red button to open the Picture menu:
Select the Picture position line using arrow buttons Ÿ / ⁄ and
set them using arrow buttons / ÿ.
S-Video signal output
Connect the S-Video video recorder or S-Video camcorder to the
Scart socket F for playback.
NTSC standard playback
In addition, playback of the NTSC standard 3.58 MHz and 4.43
MHz is possible via the Scart socket E.
Selecting sockets
The connection sockets can be selected using a selection menu.
This appears on the screen if you press the AV button.
Use arrow buttons Ÿ / ⁄ to set the desired source. To activate,
press the OK button. Press the EXIT button to quit the menu.
• Select AV 1, AV 2 or AV 3 to reproduce the
AV signal:
AV 1: Scart socket E
AV 2: Scart socket F
AV 3: Scart socket D (only 23LB020S4 and 30LB020S4)
• Select RGB to reproduce the RGB signal (the playback de-
vice must be connected to Scart socket E).
• Select S-VHS to reproduce the S-VHS signal (the playback
device must be connected to Scart socket F).