Technicolor - Thomson 23LB020S4 CRT Television User Manual


 
Preparations
7
Maintenance
Electronic components are subject to a natural ageing
process. In the event of malfunctions, please consult a specialist
dealer. Only use the original packaging for transporting the unit.
Caution!
The unit is operated at dangerous voltages. The unit
may only be opened by an authorised specialist. All
maintenance and servicing work must be carried out by
an authorised company. Repairs that are carried out in-
correctly could result in fatal injuries to the user.
Unauthorised tampering with the inside of the TV invalidates the
warranty.
Note:
To make it easier to identify your television when
handed over to customer services, state the identifica-
tion number printed on the type plate on the rear of the
unit.
The manufacturer shall not warrant for any damage caused by im-
proper maintenance and repair work by third parties.
Caution, risk of burning-in!
Reproducing a still image for longer periods has a
negative effect on the picture quality. Burn-in images
and permanent effects on the screen can be avoided by
implementing a series of basic precautionary measures.
Observing the following recommendations will ensure
that the television delivers satisfactory results in the long
term:
Avoid frequent playback of the same image and mov-
ing images with static areas (e.g. fixed fade-ins in the
image or video games with areas that do not move).
Do not view the same teletext page for long periods.
Avoid playing back on-screen fade-ins from a decoder,
DVD player, video recorder or other equipment for
long periods.
When you use the freeze-frame function on a television,
video recorder, DVD player or other equipment, do not
leave the picture on freeze-frame or pause for long peri-
ods.
Pictures with extremely light and extremely dark areas
beside one another should not be played back for long
periods.
After use, always switch the display back to standby
mode!
Scope of delivery
1 x LCD TV
1 x power pack (not with 30LB020S4)
1 x mains cable
1 x base (with LCD TV 30LB020S4, not preassembled)
1 x remote control
2 x batteries AAA 1.5 volt for remote control
1 x antenna cable
2 x speakers (only 30LB020S4)
2 x speaker cable (only 30LB020S4)
1 x instruction manual
Setting up and installing the 30LB020S4
To set up the 30LB020S4 LCD TV, please proceed as follows:
Fitting the base
Fit the base to the rear of the unit using the screws (x 4) sup-
plied.
Check that the screws are seated correctly.
Fixing and connecting the speakers
Note:
Only the speakers supplied should be connected to the
television.
Fix the speakers supplied to the housing using the screws pro-
vided (2 for each speaker). Or position them in the desired lo-
cation around the television.
Connect the speakers to the terminal connectors on the rear of
the unit. Press down the terminal levers to plug in the speaker
cables. Use the speaker cables supplied and make sure that
they are connected correctly (left +, left -, right +, right -). The
black wire in the speaker cable must be secured to the black
(–) terminal on the television. The second wire must be con-
nected in the same way.
Note:
Only plug in the stripped end of the speaker cable!
En