Filter
Top Products
13
Automatic programming (Naviclick)
Your DVD recorder offers you a TV programming guide for certain channels.The information it
provides you comes from the Teletext log and the NexTView service broadcast for certain
channels.The updating of Naviclick information is carried out once every 24 hours. Naviclick
allows you to display on your screen the programmes of those channels
and to select the
broadcasts you wish to record simply by clicking on them.
Consulting the TV guide with Naviclick
MENU Watch TV OK Naviclick OK
Use the keys
C, B to move from one channel to another or to move around in the channel
programme list (
▲, ▼
➔
moving from one programme to another) (
FWD, REV
➔
moving from
6 to 6 programmes).
To consult the programs of the channels at a given time, choose a program from the list (e.g.: 9
o’clock news) and use the (
C, B) keys to move on to the programs of the other channels.
Recording through the Naviclick TV guide
1.
Select a channel on your DVD recorder.
2. Press the NAVICLICK key and wait for the Naviclick page to appear.
3. Go to the programme you want to record. Move from one channel to another with
PR+/PR- or C, B.
4. Confirm by pressing OK.
5. To select another programme to record, press C to display the Naviclick page.
6. Leave the menu using EXIT. Switch off your DVD recorder or leave it switched on (don’t
forget to load a DVD R or DVD RW disc if you modify the default internal DVR destination
to DVD R/RW in the programming setup menu). In this case the DVD recorder will
automatically seek the channel to automatically record at the correct recording time.
Note
:
for the correct downloading of the programme guide, the clock of your DVD recorder must be set.
Recording from a connected device
1. Satellite receiver - When you are watching a channel, select the DVD recorder’s AV2 input
with the
AV key on the remote control. AV2-SAT-CABL is displayed in the banner and on
the display (
LIVE AV2) on the DVD recorder for the SCART IN socket.
2. Video camera or other device - When you are watching a channel, use AV to select the
AV3 socket if your video camera is connected to the front of your DVD recorder.
Record with
REC (RECORD).
Stop the recording by pressing twice on the
STOP key.
Recording functions
EN
EN
02_DTH8640_50_en.qxp 17/02/06 10:55 Page 13