Technicolor - Thomson DTH8640 DVD Player User Manual


 
9
EN
EN
Recording functions
Taking a break (Time Shift function)
Your recorder can save in its memory images of the last 60 or 120 minutes of the programmes
viewed. Use the scroll keys (
PAUSE, PLAY, REVG/F...) to use this function.
The symbol in the information banner indicates that you are watching a delayed
programme.The delay between the images being watched and the live images is indicated to the
left of the banner.You can return to the live broadcast using the
LIVE key.
Note:This function which is associated with the Save Buffer function lets you save a programme for which
you missed the start to the DVR hard disc.
Record the current programme
Recordable discs
DVD R/RW - The majority of DVD R (write once) and DVD RW (re-recordable) of 4.7 Gb
capacity with the following characteristics.
Recommended brands and types
Certain brands of discs have been “approved” for your DVD recorder. Other brands can be
used but the discs must be good quality to produce successful recordings. Recommended brands:
Imation, Maxell, Philips, Ricoh, Sony, TDK,
Verbatim.
The DVD discs are certified for certain
recording speeds.These speeds must correspond
to the capabilities of your player, i.e.:
Note:The brands mentioned in this manual are registered
trademarks
Configured recording (HDD or DVD discs)
Configured recording lets you record the programme after a quick adjustment of the duration,
the quality and the destination of the programme to be recorded to the hard disc (HDD) or to a
DVD R/RW disc.
Note:You can start a recording at any time by pressing the DVD REC button on the front twice to record
to a DVD R/RW disc or the HDD REC button on the front to record to the hard disc (also using the REC
button on the remote control).
1. Load a disc - Open the disc tray by pressing OPEN/CLOSE. Put in a disc with the printed
side upwards. Close the tray using the
OPEN/CLOSE key.
2. Press the REC key on the remote control.
Note: for an immediate recording to the hard disc, press the REC button on the remote control twice.
3. You can choose a duration using the Bkey. Each time you press the B key the duration is
increased by 30 minutes up until the maximum time remaining on the disc is attained.When
the maximum duration is reached, pressing again on B displays --h--min which indicates the
precise time remaining, for example 1 hour 12 min.
4. The time remaining on the disc is indicated next to Recording quality. If you modify the
quality you will also modify the duration, which may be useful with a DVD R/RW disc which
has little space. Select Recording Quality with the
key, then select a lower recording
quality using the B key, this will increase the amount of time available on the disc. However,
for a recording to the hard disc that you can copy later to a DVD R/RW disc, increase the
quality.
02_DTH8640_50_en.qxp 17/02/06 10:55 Page 9