TOA Electronics C-DR091 CU Series DVR User Manual


 
90
NETWORK SETTING
IP ADDRESS 192.168. 0. 1
SUBNET MASK 255.255.255. 0
DEFAULT GATEWAY 192.168. 0. 2
WEB
SERVER PORT DEFAULT
USER PASSWORD
ADMIN PASSWORD
LIVE QUALITY 1(HIGH)
MAX BI T RATE MAX
PRIMARY DNS 192.168. 0. 2
SECONDARY DNS 192.168. 0. 2
NTP SERVER ntp.ne.jp
TIME ZONE(GMT) +09:00
1
9
2
Item
IP ADDRESS
Description
Set IP address.
Selection
(192.168.0.100) 0-255
SUBNET MASK Set Subnet mask.(255.255.255.0) 0-255
PRIMARY DNS Set the primary DNS server’s IP address.
( 0. 0. 0. 0) 0-255
SECONDARY DNS Set the secondary DNS server’s IP address.( 0. 0. 0. 0) 0-255
NTP SERVER Set the NTP server’s domain.
Up to 46 alphanumeric characters
TIME ZONE
(
GMT
)
The time obtained using NTP is the UTC time (Universal Time
Coordinated), which is the error time to be used to adjust to
local time. It can be set in 15 minutes units.
This correlates to NTP server's time synchronization,
folder name and file names at the time of DVD archiving.
Perform settings correctly.
-
12:00
-
+0:00
-
+13:00
DEFAULT GATEWAY
Set Default gateway.( 0. 0. 0. 0) 0-255
WEB SERVER PORT Set the web server port number. Standard: No. 80Standard / 1024
-
65535
WEB USER PASSWORD
Set the password to be used when logging in using a user account.
Set the password to be used when logging in using an admini-
strator account.
Up to 10 alphanumeric characters
Up to 10 alphanumeric characters
WEB ADMIN PASSWORD
WEB LIVE QUALITY Set the live distribution picture quality.
WEB MAX BIT RATE
Set the maximum transfer speed.32 kbps / 64 kbps /
128 kbps / 256 kbps /
512 kbps / 1 Mbps /
2 Mbps / 4 Mbps / MAX
Note:
Underlined settings represent factory-preset settings.
1 HIGH
2
3
4
5 LOW
1: 32 KB (High picture quality)
2: 28 KB
3: 24 KB
4: 20 KB
5: 16 KB (Low picture quality)
*
1
*
1
*
1
Setting a password is recommended. If no password is set, then settings can be changed simply by accessing using
a web browser.
WEB SERVER USER PASSWORD
password
01234 56789
ABCDE FGHIJ
KLMNO PQRST
UVWXY Z
abcde fghi j
klmno pqrst
uvwxy z
!”#$% & ()
+,
-
./ :;<=>
?@^_ ` { | }~ DEL END
0
Follow the procedures in the Camera Name Settings to set web
user password, web admin password, and NTP servers. (Refer
to p. 89; Camera name setting)
25. NETWORK SETTING
The Digital Video Recorder permits remote monitoring,
recorded image search, and playback settings via a network.
Set the network address and password.