Filter
Top Products
10 Installation
ing to your antenna system.
2.6.1 LNB Setting
The LNB (Low Noise Block)
down-converter amplifies the
signal received by the antenna
and lowers the frequency of
the signal. The signal is then
fed from the LNB to the digital
receiver.
To configure the LNB setting, se-
lect the Installation > LNB Set-
ting menu.
Satellite Name
Pressing
✄
✂
✁
OK button displays the satellite list, which is listed in
alphabetical order. Select one of the preprogrammed satellites
that corresponds to the direction of the antenna. If a desired
satellite is not in the list, then select Other.
LNB Frequency
Select the local oscillator frequency of the LNB. You can input
the frequency with the numeric buttons.
LNB Power
Set this parameter to on to supply the LNB with power.
22 kHz
If you have a 22 kHz tone switch box and wish to enable it, set
this parameter to on. If the LNB Frequency parameter is set to
Universal LNB, this parameter is not available.