Filter
Top Products
2.6 Station Settings 19
Service Search
It is used to go to Service Search menu directly from SAT/TP
Edit menu.
2.6.6 Factory Setting
All the stored data can be reset just like it was manufactured.
To reset all of the settings and lists, select the Installation >
Factory Setting menu. The factory setting has two steps. The
first is to reset the service data and other system configura-
tions except Motorized DiSEqC 1.2 setting. The second is to
reset the parameters of Motorized DiSEqC 1.2.
2.6.7 System Recovery
To restore the preference settings and lists, select the Installa-
tion > Factory Setting menu. All the data and system setting
can be stored and restored.
Recover
It recovers all the stored data and system setting. The factory
default setting will be reloaded unless the installer stores the
data and system setting by Store function.
Store
It stores all the data and system setting as current setting. The
stored data and seting will be restored by Recover function. It
is permitted only to the installers. The PIN code is different
from that of users.