Filter
Top Products
2.6 Station Settings 13
Symbol Rate
In manual, advanced or SMATV search mode, select or enter
the symbol rate of the transponder you want to search.
Polarization
In manual or advanced search mode. select the polarization
type of the transponder you want to search.
Network Search
In automatic or manual search mode, if NIT (Network Infor-
mation Table) is available and this parameter is set to on, the
information of the transponder you want to search will be
found.
PID
PID (Packet Identifier) is a set of numbers that identifies the
transport streams packets from a single data stream. In ad-
vanced search mode, enter and save the PIDs of the transpon-
der you want to search.
FTA/Scrambled
Select the station class you want to search. FTA (Free To Air)
is free, but CAS (Conditional Access System) is not.
Start Search
To start the service search, select this menu. To cancel the
search in process, press the
✄
✂
✁
EXIT button.