Toshiba 15CV100U Flat Panel Television User Manual


 
51
Chapter 7: Using the TV's advanced features
Using CableClear
®
digital noise
reduction
The CableClear
®
digital noise reduction feature
allows you to reduce visible interference in your
TV picture. This may be useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
Using MPEG noise reduction
The MPEG noise reduction feature allows you to
reduce visible interference caused by MPEG
compression. Choices for MPEG noise reduction
are Off, Low, Middle, and High. Off is
automatically selected when this feature is
disabled (“grayed out”).
To select the MPEG noise reduction level:
Using the Game Mode feature
You can use the Game Mode feature for shorter
frame delays when playing a video game requiring
split-second timing between the on-screen display
and input from the controller (such as music
creation and high-action games).
This feature is more effective for 480i and 1080i
input signals.
Note: To use the Game Mode feature, the
current video input must be Video,
ColorStream HD, HDMI 1, or HDMI 2. The
Game Mode cannot be turned on when any
other video input is selected.
To turn on Game Mode:
To turn off Game Mode:
Select Off in step 2 above, change the video input,
or turn the TV off and then on again.
Note: You can change the video input by
pressing on the remote control ( Page
33).
Using the Auto Brightness
Sensor
When the Auto Brightness Sensor feature is set to
On, the TV will automatically optimize the
backlighting levels to suit ambient light
conditions.
1
From the Picture menu, press or to
select Noise Reduction and then press .
2
Press or to select CableClear and then
press or to select your desired setting and
then press .
Note:
If the current input is ANT/CABLE, or
Video, the menu will display the text
“CableClear”. The available selections
are Off, Low, Middle, and High.
If the current input is ColorStream HD,
HDMI 1,or HDMI 2, the menu will display
the text “DNR”. The available selections
are Off, Low, Middle, and High. Low,
Middle, and High will reduce the noise
in varying degrees, from lowest to
highest, respectively.
3
To save the new settings, highlight Done and
then press .
To revert to the factory defaults, highlight
Reset and then press .
1
From the Picture menu, press or to
select Noise Reduction and then press .
2
Press or to select MPEG Noise
Reduction and then press or to select
either Off, Low, Middle or High and then
press .
3
To save the new settings, highlight Done and
then press .
To revert to the factory defaults, highlight
Reset and then press .
1
From the Picture menu, press or to
select Game Mode.
2
Press or to select On.
1
From the Picture menu, press or to
select Picture Settings and then press .
2
Press or to select Advanced Picture
Settings and then press .
3
Press or to select Auto Brightness
Sensor and then press or to select On
or Off and then press .
4
To save the new settings, highlight Done and
then press .
To revert to the factory defaults, highlight
Reset and then press .