Filter
Top Products
17
Using the TV’s features
Activating the black stretch
This function increases the strength of dark areas of the picture
which improves definition.
1 From the Picture settings menu, press u or U to select
Black stretch on the 2nd page.
2 Press I or i to select On or Off.
Note:
In the PC input mode (- page 21), this mode is not available.
Activating the MPEG NR (Noise Reduction)
If the receiving signal of MPEG is a mosquito (grained) noise
depending on the compression and conversion, the noise may
be reduced when using this function.
1 From the Picture settings menu, press u or U to select
MPEG NR on the 2nd page.
2 Press I or i to select Off, Low, Middle or High.
Note:
In the PC input mode (- page 21), this mode is not available.
Activating the DNR (Digital Noise
Reduction)
If the receiving signal is weak and the picture is blurry, the
picture may be improved when using this function.
1 From the Picture settings menu, press u or U to select
DNR on the 2nd page.
2 Press I or i to select Auto, Off, Low, Middle or High.
Note:
This function is available for 480i and 576i signals.
Selecting the color temperature
You can change the tone of the picture by selecting from three
preset color temperatures: Cool, Normal or Warm.
1 From the Picture settings menu, press u or U to select
Color Temperature on the 2nd page.
2 Press I or i to select mode you prefer.
Cool: Lends a blue hue to the picture.
Normal: Neutral
Warm: Lends a red hue to the picture.
Adjusting the color management
You can adjust the picture color quality by selecting from 6
base color adjustments : Red, Green, Blue, Yellow,
Magenta or Cyan.
1 Press M, then press I or i to display the PICTURE menu.
2 Press u or U to select 3D Color management, then
press I or i, then press I or i to select On.
3 Press Q, then press u or U to select Base color
adjustment.
4 Press Q, then press u or U to select an item you want to
adjust.
5 Press i, then press I or i to select Hue, Saturation or
Brightness.
6 Press u or U to adjust the settings as required.
Notes:
• If you select color management Off mode, this mode is not
available.
• In the PC input mode (- page 21), this mode is not
available.
Resetting the base color adjustment
The Reset function adjusts the base color adjustment to the
factory settings.
1 From the Base color adjustment menu, press u or U
to select Reset.
2 Press Q.
Color Temperature
Black stretch
MENU
Back Watch TV
EXIT
On
Cool
MPEG NR
Low
Picture settings 2/2
DNR
Auto
Black stretch
On
MPEG NR
High
DNR
Auto
Color Temperature
Cool
3D Color management
On
Hue
MENU
Back Watch TV
EXIT
Red
Blue
Green
Yellow
Magenta
Cyan
Saturation Brightness
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Reset
OK
Base color adjustment
Red
Brightness
0
Hue
0
Saturation
0