Filter
Top Products
20
Using the TV’s features
Using the stable sound
The Stable sound function limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
1 Press M, then press I or i to display the SOUND menu.
2 Press u or U to select Stable sound on the 2nd page.
3 Press I or i to select On or Off.
Note:
The Stable sound effect is active only when the sound outputs
from the speaker.
Using the bass boost
1 Press T to display Bass boost level.
2 While the Bass boost display is on the screen, press I
or i to adjust the Bass boost level.
3 To turn off the Bass boost, press T to display Bass
boost Off.
Note:
The Bass boost effect is active only when the sound outputs
from the speaker.
Activating blue screen
With the blue screen function On, the screen will
automatically turn blue and the sound will be muted when no
signal is being received.
1 Press M, then press I or i to display the FUNCTION
menu.
2 Press u or U to select Blue screen.
3 Press I or i to select On or Off.
Note:
In the PC input mode (- page 21), this function is not
available.
Other features settings
Selecting the timer menu
The Timer is especially useful if you want the TV to turn itself
on or off after a selected period of time.
1 Press M, then press I or i to display the TIMER menu.
2 Press u or U to select the required timer mode (Sleep
timer (Turn off the TV) or On timer).
The timer display will set by 10 minutes, up to 12 hours
and 50 minutes.
3 Press the Number buttons (0-9), I or i to set the On or
Off delay time, e.g. on in 30 minutes and On timer
Position 3 selected.
4 Press P to exit the menu. When setting the On timer,
press u or U to select the On timer Position and enter
the program position number you want to watch. Set the
Standby mode by pressing J on the remote control or 1
on the TV.
Activation of the Timer is indicated by the green “On-
timer indicator”, on the front of the TV (- page 8).
Notes:
• The TV will automatically turn itself off after approximately 2
hours if you do not operate the TV after turned on by on timer
function.
• If you press and hold I or i to set the On or Off delay time,
the timer display will set by 30 minutes, up to 12 hours 30
minutes.
Adjusting the brightness of side panel
You can adjust the brightness of side panel in 14:9 or 4:3, etc.
mode.
1 From the FUNCTION menu, press u or U to select Side
panel.
2 Press I or i to adjust the settings as required.
MENU
Back Watch TV
EXIT
SOUND 2/2
Stable sound
Off
Bass boost 70
Bass boost Off
FUNCTION
MENU
Back Watch TV
EXIT
Teletext
Auto
Auto format
Blue screen
Side panel
On
On
1
TIMER
MENU
Back Watch TV
EXIT
Sleep timer
00:00
On timer Position
On timer
00:30
03
Side panel
1