Filter
Top Products
31
Connecting your TV
There is no need to use an adapter for computers with DOS/
V compatible mini D-sub 15 pin terminal.
A bar may appear in the upper, lower, right or left side of the
screen, or parts of the picture may be obscured depending
on some signals. This is not the malfunction.
If the edges of the picture are stretched, readjust the picture
position adjustments in the VGA SET of PICTURE menu.
Depending on the specification of the PC you are playing
the DVD-Video on, and the DVD’s title, some scenes may be
skipped, or you may not be able to pause during multi-angle
scenes.
Signal names for mini D-sub 15 pin connector
5
10
6
15 11
1
Pin assignment for RGB/PC terminal
Pin No. Signal name Pin No. Signal name
1 R 9 VGA-5V
2 G 10 Ground
3 B 11 NC (not connected)
4 NC (not connected) 12 VGA-SDA
5 NC (not connected) 13 H-sync
6 Ground 14 V-sync
7 Ground 15 VGA-SCL
8 Ground
Using the PC setting
First press to display the video input mode list, then press
V or U and
in order to select the PC input mode (
page 23).
This function may not be available for some signal or if no
signal is received.
The optimum points of the clock phase and sampling clock
adjustments may be incomprehensible according to the
input signals.
Adjusting the picture size/position, the
clock phase of the picture and sampling
clock
Press , then press Y or Z to display the PICTURE
menu, than press
.
Press V or U to select VGA Set menu.
Menu...[PICTURE...VGA Set]
Picture Mode
H Pos
V Pos
Clock
Phase
Auto Adjust
Color Temp
Aspect Ratio
Backlight
VGA Set
15
10
10
50
EXIT OK
MENU
Confirm Return Navigate Cancel
Press or Z to select an option you want to adjust.
Press Y or Z to adjust the settings as required.
•
•
•
•
•
•
•
1
2
3
PC of the Auto Adjust
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically. Depending on the type
of the signal, there is a possibility that the display may not be
adjusted in its optimum condition with this function. In that
case, please adjust each item manually.
Press
, then press Y or Z to display the PICTURE
menu, than press
.
Press V or U to select VGA Set menu.
Menu...[PICTURE...VGA Set]
Picture Mode
Color Temp
Aspect Ratio
Backlight
VGA Set
15
10
10
50
EXIT OK
MENU
Confirm Return Navigate Cancel
H Pos
V Pos
Clock
Phase
Auto Adjust
Press and press V to select Auto adjust.
Press Z.
1
2
3
4