Filter
Top Products
Chapter 6: Using the TV’s features
54
Setting the PC Audio
This function allows you to output or mute the sound
from your PC when connecting using the PC IN
terminal and an analog RGB cable. ( page 20)
To set the PC Audio:
1無
Press and open the Sound menu.
2無
Highlight Audio Setup and press .
3無
Press p or q to select PC Audio and then press
t or u to select No or Yes.
Yes: When viewing the PC input, the audio from
the PC Audio input can be heard.
No: When viewing the PC input, there will be no
audio.
Note: Because the PC and HDMI-1 inputs
share the same set of analog audio inputs,
the PC Audio menu setting influences the
HDMI 1 Audio menu setting. If PC Audio
is set to “No,” the HDMI 1 Audio setting
changes to “Auto.” If PC Audio is set to
“Yes,” the HDMI 1 Audio setting is set to
“Digital” and is grayed out in the menu.
(Also see item 3 on page 14 and “Setting the
HDMI
®
Audio mode” on page 36.)
Using the Media Player
Using the Media Player with USB
You can enjoy photos or music contents stored on a
USB storage device.
Photo Viewer specifications:
Data type: JPEG Exif ver2.1
File format: JPEG
Maximum photo size: 6 MB
Maximum number of files: 500 / folder
Maximum photo resolution: 4096 x 4096 pixels
Best photo resolution: 1920 x 1080 pixels
Music Player specifications:
File format: MP3
Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz
Bit rate: from 8 to 320 kbps
Maximum number of files: 500 / folder
Supported file system:
FAT16 and FAT32
Note:
•
Gently insert the USB device into the port and
do not remove while viewing Media Player.
•
USB device: USB Mass Storage Class device
(MSC)
•
Connectivity is not guaranteed for all devices.
•
Connect the USB device to the TV directly.
•
Do not use a USB Hub.
•
You must obtain any required permission from
copyright owners to use copyright content.
Toshiba cannot and does not grant such
permission.
•
Depending on the file size and amount in your
USB storage device, it may take some time
for loading to view. A message will display
on-screen when loading files from the USB
storage device.
To select the Auto Start function
1無
Press and t or u to select the Application
menu.
2無
Press q to select Media Player, and then press .
3無
Select USB, and then press .
4無
Press p or q to select Auto Start.
5無
Press t or u to select On or Off.
Note: The Auto Start function does not operate for
the LAN port.
To open the Media Player
There are two kinds of methods to open the Media
Player.
Automatically open:
1無
Gently insert a supported USB storage device to
the USB port on the side of the TV. A prompt will
appear.
Note: If you repeatedly insert and remove
the USB connector, the prompt may not
appear.
2無
Press t or u to select Yes, and then press .
When the Auto Start function is On, the Media
Player menu will appear. When you select No,
nothing happens.
Note: The prompt will disappear after about
10 sec.
(continued)