Filter
Top Products
Chapter 8: Using the TV’s network features
66
Wireless Interoperability:
Wireless LAN products, like other radio devices,
emit radio frequency electromagnetic energy.
The level of energy emitted by Wireless LAN
devices however is far much less than the
electromagnetic energy emitted by wireless
devices like for example mobile phones.
Because Wireless LAN products operate
within the guidelines found in radio frequency
safety standards and recommendations,
TOSHIBA believes Wireless LAN is safe for
use by consumers. These standards and
recommendations reflect the consensus
of the scientific community and result from
deliberations of panels and committees of
scientists who continually review and interpret
the extensive research literature.
In some situations or environments, the use
of Wireless LAN may be restricted by the
proprietor of the building or responsible
representatives of the organization. Such
restriction may apply in environment where the
risk of interference to other devices or services
is perceived or identified as harmful.
If you are uncertain of the policy that applies
on the use of wireless devices in a specific
organization or environment, you are
encouraged to ask for authorization to use the
Wireless LAN device prior to turning on the
equipment.
Using under wireless LAN environment:
Note:
•
It is recommended to use IEEE 802.11a or
IEEE 802.11n on 5 GHz for audio and SD
video streaming.
•
It is recommended to use IEEE 802.11n on 5
GHz for HD video streaming.
•
It is recommended that the encoding rate of
content of Video streaming is 20 Mps or less.
•
It is not recommended to use 2.4 GHz for
audio and video streaming.
•
Content playback may be interrupted by
surrounding various interference
Setting up the Network
You can select the Network Type.
1無
From the
Setup
menu, highlight
Network Setup
and press
.
2無
Press p or q to highlight
Network Type
, and then
press t or u to select
Wired
or
Wireless
.
Note: If the Dual Band WLAN Adapter is not
connected, Wireless cannot be selected.
3無
If you select
Wired
, see “Advanced Network
Setup” on page 69.
If you select
Wireless
, see the next column.
Wireless Setup
Note:
•
This feature is grayed out when the Dual
Band WLAN Adapter is not connected or
Network Type is set to Wired.
•
Continued connection of AP (Access Point)
is not guaranteed. The connection may be
disconnected whilewatching TV.
•
Do not remove the Dual Band WLAN Adapter
while changing the settings of the wireless
connection or communicating. There are 3
methods for wireless setup:
There are 3 methods for wireless setup:
•
Easy Setup (WPS)
If AP corresponds to WPS, this can be used.
−
WPS (Wi-Fi Protected Setup
™
) is standard
designed to execute connection of
wireless LAN equipment and setup of
security easily. WPS will automatically
configure all wireless settings.
•
Assisted Setup (setup by using AP’s
notification information)
Network Name, Authentication, and Encryption
are decided based on information from AP. You
manually set Security Key.
•
Manual Setup (to input all settings)
(continued)