Filter
Top Products
Chapter 8: Using the TV’s network features
69
Advanced Network Setup
Note:
•
When the DHCP function of the router
connected with this TV is On, you can set
Auto Setup to On or Off.
(Usually set it to On.)
•
When the DHCP function of the router is Off,
set Auto Setup to Off, and manually set IP
Address or DNS Address.
IP Address Setup
Auto Setup:
1無
From the
Setup
menu, highlight
Network Setup
and press
.
2無
Press p or q to highlight
Advanced Network
Setup
, and press .
3無
Press p or q to highlight
IP Address Setup
, and
press
.
4無
Highlight
Auto Setup
, and then press t or u to
select
On
.
Note: Other items will be grayed out when
Auto
Setup
is set to
On
.
Manual Setup:
1無
From the
Setup
menu, highlight
Network Setup
and press
.
2無
Press p or q to highlight
Advanced Network
Setup
, and press .
3無
Press p or q to highlight
IP Address Setup
, and
press
.
4無
Highlight
Auto Setup
, and then press t or u to
select
Off
.
5無
Press p or q to highlight
IP Address
.
6無
Press t or u to highlight the field you want to
change, and then use the number buttons to input
the IP address. To save the setting, press
.
Note: IP address field numbers must
be between 0 and 255. If you input an
incompatible number and press
, the field
number will reset to the previous value.
7無
Press p or q to highlight
Subnet Mask
, and edit
in the same way as IP Address.
8無
Press p or q to highlight
Default Gateway
, and
edit in a way same as IP Address.
Note: If you manually set the IP address, you must
not use the same IP address for any other device.
The IP address you use should be a private
address. If you do not know the correct values to
use, please contact your network administrator or
internet service provider.
DNS Setup
Note: When the DHCP function of the router
connected to this TV is Off, set Auto Setup to
Off, and manually set the DNS address(es). Your
internet service provider should have provided
these to you.
Auto Setup:
1無
From the
Setup
menu, highlight
Network Setup
and press
.
2無
Press p or q to highlight
Advanced Network
Setup
, and press .
3無
Press p or q to highlight
DNS Setup
, and press
.
4無
Highlight
Auto Setup
, and then press t or u to
select
On
.
Note: Other items will be grayed out when
Auto
Setup
is set to
On
.
Manual Setup:
1無
From the
Setup
menu, highlight
Network Setup
and press
.
2無
Press p or q to highlight
Advanced Network
Setup
, and press .
3無
Press p or q to highlight
DNS Setup
, and press
.
4無
Highlight
Auto Setup
, and then press t or u to
select
Off
.
5無
Press p or q to highlight
Primary DNS Address
.
6無
Press t or u to highlight the field you want to
change, and then use the number buttons to input
the Primary DNS Address. To save the setting,
press
.
Note: DNS address field numbers must
be between 0 and 255. If you input an
incompatible number and press
, the field
number will reset to the previous value.
7無
Press p or q to highlight
Subnet Mask
, and edit
in the same way as IP Address.
8無
Press p or q to highlight
Secondary DNS
Address
, and edit in a way as Primary DNS
Address.
(continued)