Filter
Top Products
12
LX177 (E/F) Web 213:276
Chapter 1: Introduction
TV back panel connections
For an explanation of cable types and connections, see pages 14–23.
4 562 3
1
TV back
Cable Clamper
Power cord
1 IR OUT — For controlling infrared remote-controlled
devices through the TV. You can connect up to two
devices with an optical IR blaster cable (- pages 14 and
18), and then control the devices using the TV’s IR pass-
through features.
IR IN — For connecting to IR OUT on other devices
(- page 19).
2 ColorStream
®
HD-1 and ColorStream
®
HD-2 —
Two sets of ColorStream
®
high-definition component
video inputs (with standard stereo audio inputs) for
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream
®
.
Note: Component video cables carry only video
information; separate audio cables are required for a
complete connection.
3 VIDEO-1 IN — Standard (composite) video and standard
audio inputs plus optional S-video inputs for connecting
devices with composite video or S-video output.
Note: Standard (composite) video and S-video cables
carry only video information; separate audio cables are
required for a complete connection.
4 Fixed Audio OUT — Analog audio outputs for
connecting an audio amplifier.
When the POP double-window is open, the active window
sound is output (- page 59).
5 PC/HDMI-1 (AUDIO) IN — PC audio input terminals
are shared with HDMI-1 analog audio input terminals, and
their use can be configured in the Audio Setup menu
(- page 72).
6 Variable Audio OUT — Standard analog audio outputs
for connecting an analog amplifier with external speakers.
When the POP double-window is open, the active window
sound is output (- page 60).
42LX177_EN.book Page 12 Tuesday, May 15, 2007 1:58 PM