Filter
Top Products
74
LX177 (E/F) Web 213:276
Chapter 6: Using the TV’s features
CE-Link Player Control menu functions:
1 Press C and open the THINC Applications menu.
2 Press B or b to highlight CE-Link Player Control and
press T.
3 Press B or b to select the item you want to control and
press T.
– POWER turns the selected device on and off.
– Top Menu accesses the top menu of a DVD.
– Menu accesses the menu of a DVD.
– Contents Menu accesses the contents list when you
press T. At this time, the CE-Link Player Control
menu will disappear.
Note:
• These functions depend on the devices that are connected.
• The CE-Link Player Control item will be grayed out in the
following conditions:
- A non-HDMI input is currently selected.
- The Enable CE-Link item is set to Off.
- The connected device is not a playback or recording
device.
CE-Link input source selection
If a CE-Link device with HDMI switching capability (e.g.
Audio Receiver) is connected to the HDMI input, you can
select another CE-Link device that is connected to the master
HDMI device using the TV’s INPUT button. See page 51 for
details.
Audio Receiver VOLUME and MUTE control
With your TV’s remote control, you can adjust or mute the
sound volume of the speakers connected to the TV via an audio
receiver. First, select TV mode by pressing the TV button
under MODE SELECT on the remote control.
• z Z adjust the volume level.
• W turns off the sound.
Note:
• To use this function:
- Set Speaker Preference to Audio Receiver in the CE-
Link Setup menu.
- Confirm that a connected CE-Link device (such as HD
DVD player, etc) is selected for the Audio Receiver input
source.
• You can also use this function when the audio receiver is
connected to the TV’s DIGITAL AUDIO OUT terminal (not
HDMI connection). In this case, select a digital audio input
mode on the Audio Receiver.
• These functions depend on the device connected.
Other CE-Link functions
When the Enable CE-Link is set to On, the following
functions can be enabled by setting them to On.
• TV Auto Input Switch
If a connected HDMI device starts playing video or audio,
the TV will automatically switch to the appropriate HDMI
input.
• TV Auto Power
If a CE-Link device is turned on or off, the TV turns on or
off automatically.
• Device Auto Standby
If the TV is turned off, the TV will send a message to turn
off all of the CE-Link devices connected to the TV.
• Speaker Preference
From this item, you can set your audio output preference to
the TV speakers or the audio receiver speakers. When this
item is set to Audio Receiver, the TV remote can be used to
adjust or mute the volume of the audio. This item will be
grayed out unless a CE-Link compatible audio receiver is
connected.
Note: When you turn on the Audio Receiver, change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver’s speakers even if TV Speakers has
been selected. Turn the TV off and on again to output the
sound from the TV Speakers.
THINC Applications
Picture
Viewer
Audio Player
Personal E-mail
Channel Browser
CB
Favorites Browser
CE-Link Player Control
CE-Link Player Control
Recorder
Power
Top Menu
Menu
Contents Menu
Navigate Select Exit
ENTER
EXIT
42LX177_EN.book Page 74 Tuesday, May 15, 2007 1:58 PM