Toshiba 42WP56E Flat Panel Television User Manual


 
20
Basic operation
Picture quality adjustment
Basic operation
Picture quality adjustment
To select the picture mode:
You can select the picture quality instantly among three preset
modes and one user-set mode.
Press the button to select
the desired picture quality.
Dynamic, Standard, Mild and
Memory (user-set) can be selected
cyclically.
Note:
In the PC input mode (see page 29), this mode is not available.
To adjust the basic picture quality:
Press the MENU button, then
press the
or button to
display the PICTURE menu.
Press the or button to
select the Picture settings
menu, then press the OK
button.
Press the or button to
select Contrast, Brightness,
Color, Tint or Sharpness, then
press the
or button to
adjust the level.
Notes:
• In the PC input mode (see page 29),
Color, Tint and Sharpness modes are
not available.
• The Tint may only be adjusted on a tape
which has been recorded and played
back on an NTSC VCR.
DVD
MENU
P
P
21 3
54 6
87 9
VCR
TV
DVD
0
OK
CALL
MENU
EXIT
Dynamic
Contrast 100
Sharpness
Tint
MENU
Back Watch TV
EXIT
0
0
On
Black stretch
Contrast
100
Picture settings 1/2
Color
50
Brightness
50
Mode Picture quality
Dynamic bright and dynamic picture
Standard standard picture
Mild soft picture
Memory the picture quality you set
About ISM (Image Sticking Minimization) function
The ISM function (The Image Sticking Minimization function)
automatically starts to decrease the brightness with small steps when
fixed pattern displays for long time. The pace of the decrease and the
delay time depend on the brightness in the displayed screen.
The ISM function is set to ON by default. You cannot change this
setting.
Selection Pressing
Contrast lower higher
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper