Filter
Top Products
38
Equipment
connections
Equipment connections
Connecting a computer
• Before connecting PC and audio cables, remove the back terminal covers (see page 10).
• An analog RGB (15 pin) computer cable can be connected.
To connect a computer
Connect a PC cable from the computer to the RGB/PC terminal on the back of the TV.
The following signals can be displayed:
• VGA: 640 x 480 @ 60 Hz
• SVGA: 800 x 600 @ 60 Hz
• XGA: 1024 x 768 @ 60 Hz
If you connect this unit to your PC, the compressed images are displayed in SVGA and XGA modes; therefore
the picture quality may deteriorate and characters may not be read.
Notes:
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers with DOS/V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left side of the screen, or parts of the picture may be obscured
depending on some signals. This is not a malfunction.
• If the edges of the picture are stretched, readjust the picture size/position adjustments in the PC Setting menu.
• Depending on the specification of the PC you are playing the DVD-Video on, and the DVD’s title, some scenes may
be skipped, or you may not be able to pause during multi-angle scenes.
Signal names for mini D-sub 15 pin connector
Audio cable for
PC-to-TV connection
Conversion adapter
(if necessary)
RGB PC cable
Mini D-sub
15 pin
Computer
TV back view
Pin assignment
for RGB/PC
terminal
Pin No. Signal name Pin No. Signal name
1R 9 NC
2 G 10 Ground
3B 11 NC
4 NC (not connected) 12 NC
5 NC 13 H-sync
6 Ground 14 V-sync
7 Ground 15 NC
8 Ground
11
1
5
6
10
1
5