Filter
Top Products
37
Introduction
Getting started
Basic operation
Equipment
connections
Reference section
Viewing teletext Using TV’s features
Equipment connections
Back connections
Connection example
Computer
DVD video player
(with component
video outputs)
VCR (Recording)
Audio system
(see page 26, 27)
Woofer system
with amplifier
(see page 28)
• Before connecting any external equipment, turn off all main power switches.
• Before connecting any external equipment, remove the back terminal cover (see page 10).
• The unauthorized recording of television programs, video tapes and other materials may infringe upon the
provisions of copyright laws.
• Connect either the S-VIDEO input terminal or VIDEO input terminal, whichever terminal is used. Never connect
both of these terminals.
• In addition, there is a fixed/variable external audio output which enables the connection of a suitable audio
system. A 3.5 mm switched phono socket allows an external active Woofer system to be connected.
• The COMPONENT VIDEO INPUT consists of three component video jacks (Y, P
B/CB, PR/CR) and provides the
best picture performance. These jacks can only be used with the component video compatible equipment, e.g. DVD
video player etc.
• Additional equipment and cables shown are not supplied with this TV.
VCR
(S-Video or Normal )
TV back view
Set Top Box
HDMI device
(see page 41)
DVI device
(see page 41)