Filter
Top Products
21
Introduction
Getting started
Basic operation
Equipment
connections
Reference section
Viewing teletext Using TV’s features
To activate the black stretch
This function increases the strength of dark areas of the picture
which improves definition.
From the Picture settings
menu, press the
or button
to select Black stretch.
Press the or button to
select On or Off.
Note:
In the PC input mode ( see page 29 ), this mode is not available.
To activate the MPEG NR (Noise Reduction)
If MPEG pictures include mosquito noise (grainy outlines around
images within the picture which may result depending on
compression and conversion rates), it may be reduced by using this
function.
From the Picture settings
menu, press the
or button
to select MPEG NR on the 2nd
page.
Press the or button to
select Off, Low, Middle or
High.
Note:
In the PC input mode (see page 29), this mode is not available.
To activate the DNR (Digital Noise Reduction)
If the receiving signal is weak and the picture is blurry, the picture
may be improved when using this function.
From the Picture settings
menu, press the
or button
to select DNR on the 2nd page.
Press the or button to
select Auto, Off, Low, Middle
or High.
Note:
This function is available for 480i and 576i signals.
Color Temperature
MENU
Back Watch TV
EXIT
Normal
MPEG NR
Low
Picture settings 2/2
DNR
Auto
DNR
Auto
Sharpness
Tint
MENU
Back Watch TV
EXIT
0
0
On
Black stretch
Contrast
100
Picture settings 1/2
Color
50
Brightness
50
DVD
MENU
P
P
21 3
54 6
87 9
VCR
TV
DVD
0
OK
CALL
MENU
EXIT
Black stretch
On
Color Temperature
MENU
Back Watch TV
EXIT
Normal
Picture settings 2/2
DNR
Auto
MPEG NR
Low
MPEG NR
High