Toshiba 5257Z3500A(E)
20
Using the TV’s features
Alternatively, you may adjust the bass boost level directly
using t.
1 Press
t
to display Bass boost level.
2 While the Bass boost display is on the screen, press
or to adjust the Bass boost level.
3 To turn off the Bass boost, press
t
to display Bass
boost Off.
Note:
The Bass Boost effect is active only when the sound outputs
from the speaker or an external woofer system.
Using an external woofer system
Connect an external woofer to the WOOFER output terminal
located on the rear of the TV (- page 28).
1 Select the woofer External mode from the AV
connection menu.
2 From the SOUND menu, press or to select
External Woofer on the 2nd page.
3 Press or to select On.
4 Press to select External Woofer level.
5 Press or to adjust the External Woofer level.
6 To turn off the External Woofer, press or to select
External Woofer, then press or to select Off.
Alternatively, you may adjust the External Woofer level
directly using t.
1 Press
t
to display External Woofer level, then press
or to adjust the External Woofer level.
2 To turn off the External Woofer, press t to display
External Woofer Off.
Selecting the audio output
With the audio output function “Variable”, you can use the
TV’s remote controller to adjust the sound volume of the
external audio system connected (- page 28).
To select the sound volume from AUDIO output
terminals:
1 From the AV connection menu, press or to select
Audio output.
2 Press or to select Variable or Fixed.
Note:
Make sure the volume control of your audio amplifier is set to a
moderate listening level.
Other features settings
Selecting the timer menu
The Timer is especially useful if you want the TV to turn itself
on or off after a selected period of time.
1 Press M, then press or to display the TIMER menu.
2 Press or to select the required timer mode (Sleep
timer (Turn off the TV) or On timer).
3 Press the Number buttons (0-9), or to set the On or
Off delay time, e.g. on in 30 minutes and On timer
Position 3 selected.
4 Press P to exit the menu. When setting the On timer,
press or to select the On timer Position and enter
the program position number you want to watch. Set the
Standby mode by pressing 1 on the remote control.
Activation of the Timer is indicated by the green “On-
timer indicator”, on the front of the TV (- page 8).
Notes:
• The TV will automatically turn itself off after approximately 2
hours if you do not operate the TV after turned on by on timer
function.
• If you press and hold
or to set the On or Off delay time,
the timer display will set by 30 minutes, up to 12 hours 30
minutes.
Using the auto format
When the TV receives a true HDMI signal picture and the auto
format is On, it will automatically be displayed in HDMI
signal format, irrespective of the TV’s previous setting.
1 Press M, then press or to display the FUNCTION
menu.
2 Press or to select Auto format, then press or
to select On or Off.
Bass boost 70
Bass boost Off
On timer Position
On timer
Sleep timer
TIMER
MENU
Back Watch TV
EXIT
00:00
00:00
01
FUNCTION
MENU
Back Watch TV
EXIT
1
Teletext language
Auto format
On
Blue screen
On
Side panel
1
Teletext
Auto
5257Z3500.book Page 20 Wednesday, October 24, 2007 6:34 PM