Toshiba 52Z3500T Flat Panel Television User Manual


 
Toshiba 5257Z3500A(E)
31
Connecting your TV
Selecting the PC/HDMI1 audio mode
You can select PC audio or HDMI audio when using this
function (- page 29).
1 Press M, then press or to display the SET UP
menu.
2 Press or to select AV connection, then press Q
to display the AV connection menu.
3 Press or to select PC/HDMI1 audio, then press
or to select PC or HDMI1.
Setting the HDMI1 audio mode
You can select sound of an HDMI or DVI device connected to
the HDMI input terminals (- page 29) from three modes:
Auto, Digital or Analog.
Note:
This function is available only when the PC/HDMI1 audio mode
is set to
HDMI1.
1 From the AV connection menu, press or to select
HDMI1 audio.
o
2 Press or to select Auto, Digital or Analog.
Using the HDMI setting
HDMI (Deep Color), if available from the DVD source, will
subtly enhance the color. Some older DVD players may not
display color correctly, if so switch the feature to Off. Lip
Sync can syncronize the sound and picture.
1 From the AV connection menu, press or to select
HDMI setting and press Q.
2 Press and to select an option, then or to adjust
the settings.
Deep Color: On
This feature allows to HDMI source to increase available
colors bits within the boundaries defined by the RGB or
YCbCr color space.
xvYCC: On
This feature expands the acceptable color range (limits) in
the HDMI signals, then allows sending wider color signals
from HDMI source.
Lip Sync: On
This option activates an auto audio/video display timing
adjustment function that allows HDMI source devices to
accurately perform synchronization automatically.
xvYCC selection
The color range xvYCC is an international standard and
enables a wider color range than conventional video
applications.
If the xvYCC selection is set to Auto, your TV will
automatically detect image supported xvYCC.
When the xvYCC in the HDMI setting menu is set to On, it
allows this function to be selectable.
1 From the PICTURE menu, press or to select
xvYCC selection.
2 Press or to select On, Off or Auto.
Notes:
HDMI, the HDMI logo, High-Definition Multimedia Interface
and Deep Color are trademarks or registered trademarks of
HDMI Licensing, LLC.
All above HDMI settings are available in the HDMI input
mode and need proper HDMI source device. If HDMI source
products does not support these features, the TV may not
work properly by activating these features.
If your HDMI connection is capable of 1080p and/or your TV
is capable of refresh rates greater than 60 Hz or supports
Deep Color
TM
, you will need a Category 2 cable.
Conventional HDMI/DVI cable may not work properly with
this mode.
Picture position
AV connection
OK
OK
Manual setting
OK
Language
SET UP
MENU
Back Watch TV
EXIT
English
MENU
Back Watch TV
EXIT
PC/HDMI1 audio
HDMI1 audio
AV connection
PC
Woofer
External
HDMI setting
Audio output
Fixed
Digital
OK
MENU
Back Watch TV
EXIT
PC/HDMI1 audio
HDMI1 audio
AV connection
HDMI1
Woofer
External
HDMI setting
Audio output
Fixed
Auto
OK
MENU
Back Watch TV
EXIT
Deep Color
xvYCC
HDMI setting
Off
Lip Sync
On
Off
5257Z3500.book Page 31 Wednesday, October 24, 2007 6:34 PM