Filter
Top Products
60
Initial Setup and Menu
Bar Wizard and select this channel each time the TV is turned on.
v
If time information is not being received correctly, records of
previously watched channels may not be stored properly.
v
The records of previously watched channels may be erased.
v
To set a channel from an external input, first set the IR Blaster settings.
Register channels from devices connected through IR Blaster, and
DTV or cable TV channels.
1 Select Next and press the OK button.
2 Read the information on screen, and select Agree after
conrming the contents. Then select Next and press the OK
button.
A Favorite Channels registration prompt screen appears.
3 To set Favorite Channels, select Yes and press the OK button.
4 Register a channel.
v
Up to 10 channels can be set for Antenna/Cable and
external input devices.
To register an Antenna/Cable channel:
1 Press the
p
/
q
(arrow) buttons to select a channel.
2 Press the OK button and the channel marked with
3
will
be set in Favorite Channels.
To register a channel received through an external input
device:
1 Press the
t
/
u
(arrow) buttons to change the input.
2 Press the YELLOW button.
3 Use the number buttons (0-9) to enter the Channel
number to register, then press the OK button.
4 When the focus has moved to the Channel Name, press
the OK button.
5 When the software keyboard appears, enter the Channel
Name.
For how to use the software keyboard, refer to “Using the
software keyboard” on page 125.
To register another channel for the same external input
device, press the
q
(arrow) button to move the focus
to an empty space and repeat the procedure from step 2
onwards.
Performing the initial setup