Filter
Top Products
8M26S Factory Adjust Menu
(V0.2)
1. Description
Enter factory mode：
Open source menu，and then press digital button “3”, “1”, “9” , “5” in
turns to enter the factory menu. Press ↑ and ↓ button to choose the
item, press OK button enter the submenu, press ← and → button to
adjust the value.
Leave factory mode:
Press menu button to back to upper menu until leave factory mode。
Software information:
Enter factory mode, you can get the software information from the
bottom of menu.
Panel information:
Enter factory mode, enter “PANEL SETTING” item, you can get the
panel information from the bottom of menu.
Aging mode:
Enter factory mode, select “SYSTEM SETTING” item, press OK
button enter, select “AGING MODE” item, press → button open aging
mode.
Note: You can press the shortcut key in the factory remote control to
open or close the aging mode.
-21-