Filter
Top Products
15
Symbio™ Media Box and Blu-ray Disc™ Player connections
Connecting to a TV
Connecting to the digital AV receiver/amplifier
It is important to connect the player to the Internet and AV devices rst, before connecting the player to AC
power.
Connect a HDMI
TM
cable from the HDMI
TM
output jack on this player to the HDMI
TM
input jack on the TV.
An HDMI
TM
cable carries both video and audio signals. If you wish to use TV speakers, you do not need to
make an additional audio connection.
Route the sound from this player to the AV receiver/amplier/sound system to enhance audio output.
Connect a coaxial cable from the COAXIAL jack on this player to the COAXIAL jack on the device.
Digital AV receiver/
amplifier
(SampleIllustration)ConnectingtoaTV-HDMI
TM
cable
(SampleIllustration)ConnectingtoadigitalAVreceiver/amplier
Digital audio coaxial cable
(notsupplied)
HDMI
TM
cable
(notsupplied)
Symbio
TM
Media Box and Blu-ray Disc
TM
Player connections
Connecting to network
Using a wired network provides the best performance because the attached device and player are
connected directly to the network and are not subject to radio frequency interference.
To use a wireless connection, you can connect through the built-in wireless device and a wireless access
point or router (for BDX3400KU model).
To use a wireless connection, you can connect through a wireless LAN adapter and a wireless access
point or router (for BDX2400KU model).
Your Symbio™ Media Box and Blu-ray Disc™ Player can be connected to your home network: