Filter
Top Products
25
PIP
Some Blu-ray™ discs have the PIP function enabling you to display the secondary video in the primary video.
You can call up the secondary video by pressing the PIP button when the scene contains the secondary
video. See the documentation that came with the disc for playback instructions.
1 Turn on secondary video by pressing the PIP button.
2 Press the 2nd. AUDIO button to turn on the audio for the secondary video (PIP).
In order to hear the secondary audio, the PIP feature on the disc must be turned on.
3 Press the PIP button again to turn off the secondary video.
Primary video
Secondary video
with Secondary
Audio
(Sample Illustration) PIP view function
This function is not available when the primary video is played in Search, Slow-Motion, or Frame-by-Frame
or Fast Forward/ Reverse mode.
To listen to the secondary audio, the digital audio output must be set to “Bitstream”, “Re-encode” or “PCM”.
Otherwise, only the primary audio can be heard.
Blu-ray Disc™ playback
1 Load a disc or insert a USB device that contains MP3/JPEG/MPEG4 les.
2 On the setup screen, press the / button to select Video, Music, or Photo, and then press OK.
The Media Center menu appears on the screen.
You can play MP3/JPEG/MPEG4 les that have been recorded on a disc or a or a USB device on the
player.
3 Press the / button to select Data Disc or USB1, and press OK.
4 Press the / button to select a le (or folder) and press OK or to start playback.
It should match the selection on the setup screen. (If you selected Video on the setup screen, you also
should select Video here.)
Not all media formats are supported.
Playing MP3/JPEG/MPEG4 files
(SampleIllustration)MediaCentermenu
Not all the Blu-ray™ discs can support this function.
HighDenitionPIP(SecondVideo)isnotsupported.