Filter
Top Products
42 EN42 EN
SATELLITE LINK
You can set the unit to start recording whenever it
detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• The external tuner should be equipped with some kind
of timer function. Using timer function of the tuner, set
it to output audio/video signals when it comes to the
time you want to start recording, and stop output audio/
video signals when it comes to the time you want to
finish recording. Refer to the tuner’s manual on how to
set the timer.
• Make sure to set the satellite link standby mode when
you finish setting.
Preparation on this unit
• You must let the unit know which video input jack you
are using before making a recording.
Refer to “SETTINGS FOR THE VIDEO INPUT” on page 26.
1
Select the desired recording mode.
(Refer to “Recording Mode” on page
33.)
2
Press [SATELLITE LINK].
In a second, the unit will be turned into the
standby mode automatically as it goes into the
satellite link standby mode.
To cancel the satellite link function while in
the satellite link standby mode:
Press [SATELLITE LINK] or [I/
y
ON/STANDBY].
To cancel the satellite link function while the
satellite link recording is in progress:
Press [STOP C].
SE-R0265
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TOP MENU
CLEAR RETURN
MENU/LIST
WXYZ
JKL MNO
DEF
ENTER
SKIP REV
PLAY
REC MODE ZOOMRECREPEAT
PAU SE
TIME SLIP
1.3x / 0.8x PLAY
INSTANT SKIP
STOP
FWD SKIP
TIMER
PROG.
SATELLITE
LINK
STOP
SATELLITE
LINK
E7PCAUD_DR420KU_EN.indd 42E7PCAUD_DR420KU_EN.indd 42 2/6/2009 10:55:35 AM2/6/2009 10:55:35 AM