Filter
Top Products
39EN 39EN
Disc
Management
Recording
PlaybackIntroduction Connections Basic Setup Editing Function Setup VCR Function Others
TIMER RECORDING
1
Press [TIMER PROG.].
2
Use [K / L] to select “New Program”,
then press [ENTER].
Timer Programming
1/1
THU JAN/01 10:00AM
Date Start End L1/L2
New Program
• If there are 6 or more programs, use
[SKIP j / i] to change pages.
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Connect the external tuner to either L1 or L2 and set it
to output audio/video signals when it comes to the time
you want to start recording.
• Do not change the external tuner’s channel while you
are recording. You cannot watch one channel and
record another at the same time.
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space or
a cassette tape with an erase-protection tab.
Guide to Timer Programming Display
Timer Programming
1/1
THU JAN/01 10:00AMSP (1:00)
JAN/ 2/09 1:00 AM L1 SP
Date Start End L1/L2
JAN/02 1:00AM 2:00AM L1
New Program
1
5
3
4
2
1. Title of a Timer Program (Contains date, time, external
input, recording mode of the program)
2. Current date and time
3.
Recording mode and length of the recording
4. Timer program list
5.
Total number of pages and current page (2 pages maximum)
Note
• If you have not set the clock yet:
“Clock Setting” menu will appear instead of the timer programming list at step 1. Continue with the step 3 in
“Clock Setting” on page 26 before setting a timer programming.
• Use [s / B] to move the cursor to the left and the right in “Timer Programming” menu.
• If a basic recording or one-touch timer recording is in progress on one component (e.g., VCR) and the timer
recording set for the other component (e.g., DVD) is about to begin, the unit automatically switches to the
programmed channel for timer recording 2 minutes before the programmed starting time, and the recording in
progress (for VCR) will be canceled UNLESS their recording channels are the same. If their recording channels are
the same, the timer recording will start without canceling the recording currently in progress. In this case, the
recording of the same channel will be made on both DVD and VCR.
• You cannot make a program whose recording time exceeds 12 hours.
• Cancel the timer-standby mode by pressing [TIMER SET] before operation for either DVD or VCR. When finished
operating, press [TIMER SET] to resume the timer-standby mode.
• In the timer-standby mode, you can turn on the power and use the component (VCR or DVD) which is not
currently timer-programmed.
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEF
TRACKING
ENTER
INSTANT
SKIP
PLAY
DVDVCR
PAUSE
REV
SKIP
STOP
SKIP
FWD
1.3x/0.8x
PLAY
TIME SLIP
TIMER SET ZOOMSEARCHREPEAT
RECREC MODEDUBBING
ENTER
SETUP
SKIPSKIP
TIMER
PROG.
TIMER SET
GHI
PQRS TUV
SPACE
WXYZ
JKL MNO
.@/: ABC DEF
E9PKAUD_DVR620KU_EN.indd 39E9PKAUD_DVR620KU_EN.indd 39 3/25/2009 3:47:50 PM3/25/2009 3:47:50 PM