Toshiba DVR620KU DVD Recorder User Manual


 
67EN 67EN
Disc
Management
Recording
Playback
Introduction Connections Basic Setup Editing Function Setup VCR Function Others
Program Playback
Note
• To erase tracks you selected, press [CLEAR] at step 4.
• You can make program settings up to 50 tracks.
• To cancel program playback, press [STOP C] twice
during program playback. “OFF” appears on the TV
screen.
• You may also select a desired track using [the
Number buttons] at step 4.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW
You can program the disc to play back in your desired
order.
Press [DVD] first.
1) Press [SETUP] in stop mode.
2) Use [K / L] to select “DISC Playback Mode”, then
press [ENTER].
“DISC Playback Mode” menu will appear.
3) Use [K / L] to select “Program Play”, then press
[ENTER].
4) Use [K / L] to select a desired track, then press
[ENTER] or [B].
DISC Playback Mode
Program Play
0:00:00Total
--
-- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Repeat this step until you program all the desired
tracks.
5) Press [PLAY B].
DISC Playback Mode
Program Play
0:31:07Total
09
04 10 06 -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
-- -- -- -- -- -- -- -- -- --
Program playback will start.
Slide Show
You can select the display time between 5 seconds and
10 seconds.
Press [DVD] first.
1) Follow steps 1 and 2 in “Program Playback” on the
left.
2) Use [K / L] to select “Photo”, then press [ENTER].
3) Use [K / L] to select “Slide Show”, then press
[ENTER].
4) Use [K / L] to select the display time, then press
[ENTER].
5) Press [SETUP] to exit.
Note
• Large-size JPEG files take a few moments to be
displayed.
E9PKAUD_DVR620KU_EN.indd 67E9PKAUD_DVR620KU_EN.indd 67 3/25/2009 3:48:24 PM3/25/2009 3:48:24 PM