Filter
Top Products
46 EN46 EN
SETTINGS FOR AN EXTERNAL DEVICE
Recording from an External Device
1
Turn on the TV and press
[I/
y
y ON/STANDBY], and be sure to
select the input of the TV to which
the unit is connected.
2
When you want to record to the disc:
Press [DVD].
Press [OPEN/CLOSE A] to open the disc
tray. Place the disc to record properly.
Press [OPEN/CLOSE A] again to close
the disc tray.
It takes awhile to load
the disc.
When you want to record to a
cassette tape:
Press [VCR].
Insert the cassette tape with an
erase-protection tab into the cassette
compartment.
3
Select the input of the unit which the
external device is connected. (L1, L2
or DV(L3))
• To use the input jacks on the rear of this unit;
Select “L1 (Rear)” by using [INPUT SELECT
].
• To use the input jacks on the front of this unit;
Select “L2 (Front)” or “L3 (DV-IN)“ by using
[INPUT SELECT
].
4
Press [REC MODE] repeatedly to
select a recording mode.
Refer to “Recording Mode” on page 34 for DVD
or “Recording” on page 100 for VCR.
5
Press [I REC] on the unit to start
recording.
6
Start playback on the external device
to record from.
7
Press [STOP C] / [EJECT/STOP A/C]
on the unit to stop recording.
This operation may take
awhile to be completed.
Before recording from an external device, refer to the
instructions for the connection on page 45.
RACKING
DUBBING SELECT
VCR DVD
VIDEO L R DV IN
L2 L3
2
17
7
5
5
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/: ABC
GHI
PQRS TUV
SPACE
SETUP DISPLAY AUDIO
TIMER
PROG.
DISC MENU
CLEAR RETURN
TOP MENU
WXYZ
SAT.LINK
JKL MNO
DEF
TRACKING
ENTER
INSTANT
SKIP
PLAY
DVDVCR
PAUSE
REV
SKIP
STOP
SKIP
FWD
1.3x/0.8x
PLAY
TIME SLIP
TIMER SET ZOOMSEARCHREPEAT
RECREC MODEDUBBING
INPUT
SELECT
OPEN/
CLOSE
REC MODE
DVDVCR
E9PKAUD_DVR620KU_EN.indd 46E9PKAUD_DVR620KU_EN.indd 46 3/25/2009 3:47:56 PM3/25/2009 3:47:56 PM