Toshiba MW27FPX Flat Panel Television User Manual


 
20
Basic setup
Press MENU, then press or to select
option.
1
Press
or
to select “STANDARD TIME”
, then
press
.
2
Press / / / to select your time zone, then
press ENTER.
3
Press MENU repeatedly until the menu
screen is cleared.
4
In the rare event that you live within broadcast range of two
stations in two different time zones, the unit may recognize
the wrong station for the auto clock set.
To correct the situation:
Note:
To be able to select the standard time, the clock must first be
set by “AUTO CLOCK” once.
Press or to select “DAYLIGHT SAVING
TIME”, then press
.
2
Press or to select one of the options, then
press ENTER.
3
Notes:
When shipped from factory, the DAYLIGHT SAVING TIME is
set to “AUTO” position.
When the clock is not set, Daylight Saving Time setting is not
available.
When there is no Daylight Saving Time in your area, always
select “OFF” position in step 3.
When you want to set the Daylight Saving Time manually,
on the first Sunday in April you set to “ON”, and on the last
Sunday in October you set to “OFF”.
ON:
OFF:
AUTO:
for manual setting (forward one hour)
for manual setting (back one hour)
for automatic setting (read EDS in the signal)
ATLANTIC : GMT–4hours
EASTERN : GMT–5hours
CENTRAL : GMT–6hours
MOUNTAIN : GMT–7hours
PACIFIC : GMT–8hours
ALASKA : GMT–9hours
HAWAII : GMT–10hours
AUTO : AUTO SET
(GMT: Greenwich Mean Time)
To set daylight saving time
You can set the Daylight saving time automatically or
manually.
To set standard time
Press MENU repeatedly until the menu screen
is cleared.
4
ENTER
Press MENU, then press or to select
option.
1
ENTER
ENTER
ENTER
ENTER
Clock setting (continued)
5Q10501A [E]p18-21 4/17/04, 3:28 PM20