Filter
Top Products
112
Editing
Rate conversion dubbing (Dubbing at a modified bit rate)
You can reduce the recorded picture or sound rate when copying. This procedure enables content originally
recorded onto the HDD at high rate setting to be dubbed onto a DVD-RAM disc at a reduced bit rate.
Use the Rate conversion dubbing when
• you recorded a lengthy content on the HDD using the manual high rate, and it is too large to dub in the DVD-RAM disc.
• you recorded a title with setting the “DVD compatible mode” (
page 162) to “Off”, and you want to make a
DVD-R disc for that title, or you used another recorder to record a title in a DVD-RAM disc, and you want to create a
DVD-R disc for that title (Set “DVD compatible mode” to “Main” or “SAP” then execute this procedure).
The Rate conversion dubbing can be performed in two different ways: part by part or multiple parts in one time. (To
dub multiple parts in one time, the same rate is applied to all parts. You cannot set different rate to each part.)
Preparation
• Press HDD or DVD button to select a disc containing the parts that you want to dub.
1
Perform steps 1 and 2 on page 106.
2
Press QUICK MENU.
Quick Menu appears.
3
Press / to select “Rate conversion
dubbing”, then press ENTER.
“CONTENT MENU Rate Conversion Dub” appears.
Rate Conversion Dubbing for Part by Part
HDD
DVD-RAM
DVD-R
QUICK MENU
ENTER
PLAYSTOPPAUSE
REC
EXTEND
VCR Plus+ REC MENU
CONTENT MENU
EASY
NAVI
TV /VIDEO
OPEN/CLOSE
CH
VOLUME CH
QUICK MENU
INSTANT SKIP
INSTANT REPLAY
TV
TIMESLIP
HDD DVD
F
R
A
M
E
/
A
D
J
U
S
T
P
I
C
T
U
R
E
S
E
A
R
C
H
S
K
I
P
S
L
O
W
ENTER
2004/10/30 08
:
00pm TV
:
12
Rate conversion dubbing
MENU
CONTENT
(0:52:40)
Original
(Saves Original)
(Saves Original)
Same Disc
Copy
e.g.
Select Quick Menu to modify bitrate.
Higher bitrate for copied media will not improve quality.
All chapter marks will be deleted.
2.0
D/M2
LP
2.0
D/M2
LP
Original Copy
Result
Start